| DESCRIPTION: | Rebar Cutter |
|---|---|
| MODEL: | HHG-25D |
| CAPACITY: | 25.0mm |
| VOLTAGE & WATTS | 230V x 1600watts |
| WEIGHT NETT/GROSS: | 24.5/ 32kg |
| VOLUME | 0.0449cm |
| PACKING SIZE L X W X H | 566 x 230 x 345mm |
| CHEVPAC BLADE CODE |
Description
SKU : RBC1891125
Price per Unit
$935.00 (Exc GST)
$1,075.25 (Inc GST)
FEATURES:
* This HHG-25D rebar cutter has a cutting capacity of 16.0mm
* Ideal onsite tool for steel placers
* With its hydraulic action it will cut through rebar effortlessly
* Open head for easy insertion of rebars
* Ram automaticly retracts when the cutting cycle is complete
* Recycle time is 5.0 seconds
* Blade are manufactured from quality high stregth steel which is specially hardened for durability and long service life
| Weight | 32 kg |
|---|---|
| Dimensions | 0.566 × 0.23 × 0.345 cm |
Specifications
Description
Reviews (0)
Shipping & Delivery
Related products
RE-BAR BENDER: 16.0MM 230V IPH PORTABLE TYPE HHG-16W
SKU:
BBR131180
* Ideal contractors tool for re-bar bending
* Compact 230v hand held unit for site work
* Will bend 16.0mm re-bars from 0-130 degree
* Open head for easy workpiece insertion
* Fast bending speed - small cycle time
* Ram automaticly retracts after bending cycle
* Comes with steel storage box for safe storage
BLADES: OFMER CUTTER C34TMF
SKU:
BBR131265
RE-BAR CUTTER OFMER C44TTF-01 3 PHASE
SKU:
BBR131266
* Ofmer has been in this market for the past ten years
* The line of rebar processing machines Evo by Ofmer is the result of the latest technologies
* The reduction gearbox and the cutting arm form a monobloc in spheroidal cast iron
* The total absence of welding gives the product considerable strength and sealing
* The three phase motor is manufactured in Italy
BLADES: OFMER CUTTER C44TTF
SKU:
BBR131267
OFMER TP40 / 46: #194050 BUSH HOLDING PIN P42-P44
SKU:
BBR131277
SQUARE PIN P34E/P38E-TP25E/TP32E – P32/36-
SKU:
BBR131282
* The possibility to cut and bend concrete reinforcing steel rods with one only product
* Ideal for construction sites with a rather limited volume of work.
* On the market for the past ten years on building sites throughout Italy
* The reduction gearbox and the cutting arm form a monobloc in spheroidal cast iron
* The total absence of welding gives the product considerable strength and sealing.
* MAll these units are standardly produced with a wide turning plate
* That permits to obtain large curving radii, and allows to perform the “double bending”
* The motor installed is self-breaking
* Made in manufactured in Italy and designed to optimize use.
REBAR CUTTER: 16.0MM CAPACITY 230V 1PH RC-16SH
SKU:
RBC1891016
* This RC-16 rebar cutter has a cutting capacity of 16.0mm
* Ideal onsite tool for steel placers
* With its hydraulic action it will cut through rebar effortlessly
* Open head for easy insertion of rebars
* Ram automaticly retracts when the cutting cycle is complete
* Recycle time 2.5 - 3.0 seconds
* Blade are manufactured from quality high stregth steel which is specially hardened for durability and long service life
REBAR CUTTER: 16.0MM CAPACITY 230V 1PH RC-16
SKU:
RBC1891018
* This RC-16 rebar cutter has a cutting capacity of 16.0mm
* Ideal onsite tool for steel placers
* With its hydraulic action it will cut through rebar effortlessly
* Open head for easy insertion of rebars
* Ram automaticly retracts when the cutting cycle is complete
* Recycle time 2.5 - 3.0 seconds
* Blade are manufactured from quality high stregth steel which is specially hardened for durability and long service life
Reviews
There are no reviews yet.