| DESCRIPTION | Long Series End Mill |
|---|---|
| MATERIAL | HSS-M42 8% Cobalt |
| DIAMETER | 14.0mm |
| FLUTES | 4 Flute |
| LENGTH | Long Series |
| FLUTE LENGTH | 53.0mm |
| SHANK | Flatted 12.0mm |
| FINISH | Ground – Bright |
| WEIGHT NETT/GROSS | 0.120kg |
| VOLUME | 0.0001cm |
Description
SKU : EM-7365014
Price per Unit
$38.80 (Exc GST)
$44.62 (Inc GST)
FEATURES:
* This Hartlingen End Mill is a long series , General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% , Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds
* Flute hardness HRC66-68
* Flute in h6 tolerance and 100% inspected *
| Weight | 0.12 kg |
|---|---|
| Dimensions | 0.12 × 0.03 × 0.03 cm |
Specifications
Description
Reviews (0)
Shipping & Delivery
Related products
END MILL: HSS 4.0MM STD (SOMTA)
SKU:
EM-700404
END MILL: HSS 11.0MM STD
SKU:
EM-700432
END MILL: HSS 19.0MM STD
SKU:
EM-700464
END MILL: HSS 24.0MM STD
SKU:
EM-700484
END MILL: 5.0MMHSS-Co8 4 FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210205
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 6.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210206
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 13.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210213
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
END MILL: 16.0MM HSS-Co8 4FLUTE LONG-SERIES T/SHANK (SOMTA)
SKU:
EM-74210216
* These threaded shank End Mill are Long series General Purpose, 4 Flutes, Single End, Square End Style, Center Cutting Type, Right Hand Cut, HSS-M42 (8% Cobalt) ,
* Bright Finish, Rhc 30 Deg, Rhh 30 Deg, For Plunge Cutting, Peripheral Milling and Deep Slotting and Pocketing at Higher Feed and Speeds *
Reviews
There are no reviews yet.