BSW Taps
TAP: BSW 1/8″ X 40 3PC SET HAND TAPS
SKU:
TAP3283008
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1/2″ X 12 3PC SET HAND TAPS
SKU:
TAP3283034
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1-3/8″ X 6 3PC SET HAND TAPS
SKU:
TAP3283080
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1/4″ X 20 TAPER HAND TAP
SKU:
TAP3293116
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 3/4″ X 10 TAPER HAND TAP
SKU:
TAP3293148
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 3/32″ X 48 INTER HAND TAP
SKU:
TAP3303306
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Second or intermediate tap has a long chamfer and trapeziform cutting edges and preformd about 30% of the cutting work
* Normally these Intermediate or Second taps have an 4 thread lead in
TAP: BSW 7/16″ X 14 INTER HAND TAP
SKU:
TAP3303328
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Second or intermediate tap has a long chamfer and trapeziform cutting edges and preformd about 30% of the cutting work
* Normally these Intermediate or Second taps have an 4 thread lead in
TAP: BSW 1-1/4″ X 7 INTER HAND TAP (SOMTA)
SKU:
TAP3303370
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Second or intermediate tap has a long chamfer and trapeziform cutting edges and preformd about 30% of the cutting work
* Normally these Intermediate or Second taps have an 4 thread lead in
TAP: BSW 3/16″ X 24 BOTTOM HAND TAP
SKU:
TAP3313412
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Third, Bottom or finishing tap has a short chamfer and cutting edge which create the final sharp form of the thread form
* This is the tap you would use for blind hole taping
* Normally these Bottoming or Third taps have an 2 thread lead in
TAP: BSW 5/8″ X 11 BOTTOM HAND TAP
SKU:
TAP3313440
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Third, Bottom or finishing tap has a short chamfer and cutting edge which create the final sharp form of the thread form
* This is the tap you would use for blind hole taping
* Normally these Bottoming or Third taps have an 2 thread lead in
TAP: BSW 5/32″ X 32 3PC SET HAND TAPS
SKU:
TAP3283011
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 9/16″ X 12 3PC SET HAND TAPS
SKU:
TAP3283036
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1-1/2″ X 6 3PC SET HAND TAPS
SKU:
TAP3283090
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 5/16″ X 18 TAPER HAND TAP
SKU:
TAP3293121
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 7/8″ X 9 TAPER HAND TAP
SKU:
TAP3293158
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 1/8″ X 40 INTER HAND TAP
SKU:
TAP3303308
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Second or intermediate tap has a long chamfer and trapeziform cutting edges and preformd about 30% of the cutting work
* Normally these Intermediate or Second taps have an 4 thread lead in
TAP: BSW 1/2″ X 12 INTER HAND TAP
SKU:
TAP3303334
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Second or intermediate tap has a long chamfer and trapeziform cutting edges and preformd about 30% of the cutting work
* Normally these Intermediate or Second taps have an 4 thread lead in
TAP: BSW 1-3/8″ X 6 INTER HAND TAP (SOMTA)
SKU:
TAP3303380
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Second or intermediate tap has a long chamfer and trapeziform cutting edges and preformd about 30% of the cutting work
* Normally these Intermediate or Second taps have an 4 thread lead in
TAP: BSW 7/32″ X 24 BOTTOM HAND TAP
SKU:
TAP3313414
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Third, Bottom or finishing tap has a short chamfer and cutting edge which create the final sharp form of the thread form
* This is the tap you would use for blind hole taping
* Normally these Bottoming or Third taps have an 2 thread lead in
TAP: BSW 11/16″ X 11 BOTTOM HAND TAP
SKU:
TAP3313444
* These BSW (British Standard Whitworth) taps are manufactured from quality HSS-M2 for durability and extended tool life
* Third, Bottom or finishing tap has a short chamfer and cutting edge which create the final sharp form of the thread form
* This is the tap you would use for blind hole taping
* Normally these Bottoming or Third taps have an 2 thread lead in
TAP: BSW 3/16″ X 24 3PC SET TAP SETS
SKU:
TAP3283012
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 5/8″ X 11 3PC SET HAND SETS
SKU:
TAP3283040
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* These 3pc sets consist of: Taper, Intermediate and botton taps
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* The intermediate or second tap has a shorter chamfer and trapeziform cutting edgeswhich are deeper, and completes around 30% of the cutting work
* The 3rd or bottoming tap (finishing) has a short chamfer and cutting edgeswhich create the final sharp form of the thread groove
TAP: BSW 1/16″ X 60 TAPER HAND TAP
SKU:
TAP3293104
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in
TAP: BSW 3/8″ X 16 TAPER HAND TAP
SKU:
TAP3293122
* British Standard Whitworth (BSW) is an imperial-unit-based screw thread standard, devised and specified by Joseph Whitworth in 1841 and later adopted as a British Standard. It was the world's first national screw thread standard, and is the basis for many other standards, such as BSF, BSP,
* All taps are manufactured from quality HSS-M2 for durability and extended tool life
* Taper or first tap has a long chamfer and trapeziform cutting edges and preformd about 60% of the cutting work
* This Taper tap has an 8 thread lead in