LATHES SMALL
LATHE: WM-250GN 250 X 500 X 26MM BORE (NEW MODEL) 1 PH
SKU:
L--165262
* New model, one of our most popular lathes with new modifications.
* Induction hardened & precision ground V-way beds.
* Tailstocks can be offset for turning tapers.
* Stand alone coolant pump & tank system.
* Handy LED lamp located in the middle of splashguard.
* Includes change gears for metric & imperial threading.
* Righthand & lefthand thread cutting is available.
* Spindle supported by high precision bearings.
* Adjustable gibs for slideways.
* Also available with powered cross slide & longitudinal feed.
* Stand is sold seperately.
LATHE: WM 210V 210 X 400 X 20MM BORE 1 PHASE
SKU:
L--165185
* Compact lathe with variable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Transparent toolpost guard.
* Spindle supported by high precision bearings.
* Adjustable slideway gibs.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: GOSAN 1760A 7.5HP
SKU:
L--109180
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: LD-1440E 3 PHASE WITH DRO QCT (TAIWAN)
SKU:
L--109310
* Induction hardened & precision ground V-way beds.
* Hardened & ground headstock gears.
* Cast from quality high tensile cast iron.
* Sino 2 axis digital readout.
* Coolant pump & tank system.
* Fitted with a work lamp & foot brake for added safety.
* Quickchange toolpost for speedy tool changing.
* Dual graduation thread dial.
* Gap bed for larger diameter work pieces.
* Manufactured in Taiwan.
LATHE: WM-290V-F 290 X 700 X 38MM BORE V/SPEED DC MTR
SKU:
L--165288
* The WF290V-F bench lathe is fitted with a delta inverter and viariable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Longitudinal and cross feeds.
* Automatic feed & threading are fully interlocked.
* Fitted with quickchange toolpost.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: WM-250V 250 X 750 X 26MM BORE V/SPEED 1 PHASE
SKU:
L--165270
* V-way bed is hardened & precision ground.
* Spindle is supported by a precision tapered roller bearing.
* MT3 spindle taper gets more capacity.
* Powered longitudinal feed for threading.
* Adjustable gibs for slideways.
* Right land & left hand thread cutting is available.
* Tailstock can be offset for taper turning.
* Equipped with high quality gearbox belt & control board.
* Stand is sold seperately.
LATHE: SHOPTURN-280G 280 X 650 X 26MM BORE G/HEAD 1 PHASE
SKU:
L--165278
* Compact lgeared Head Lathe with 12 speed precision ground gears
* Induction hardened & precision ground bedways.
* Headstock is gear driven in oil bath.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Metric & imperial threading dial indicator.
* Extra wide bedway for more capacity.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: GOSAN 1760AV VARIABLE SPEED
SKU:
L--109182
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: JESSEY PRINCE 1330 (TAIWAN)
SKU:
L--110130
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* 8 spindle speeds, from 105 - 2000rpm.
* Optional two-speed motor with 16 speeds, 53 - 2000rpm.
* Optional variable speed motor, 40 - 2500rpm.
* Camlock spindle nose.
* Interlock device between feeding and threading.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
LATHE: WM-290V 290 X 700 X 38MM BORE V/SPEED 1 PHASE
SKU:
L--165290
* The WF290V-F bench lathe is fitted with a delta inverter and viariable speed control.
* Easy to read digital readout speed display.
* Induction hardened & precision ground bedways.
* Forward/reverse & emergency stop switches.
* Tailstock can be offset for turning tapers.
* Covered leadscrews & limit switches for safety.
* Longitudinal feed.
* Automatic feed & threading are fully interlocked.
* Fitted with quickchange toolpost.
* Ideal for hobbyists and small workshops.
* Stand is sold seperately.
LATHE: GLH-330 330 X 750 X 38MM 1 PHASE (NEW)
SKU:
L--120468H
* New Model
* Precision ground and supersonic frequency hardened bedways.
* The spindle is supported with precision roller bearings.
* Head stock gears are made of high quality steel ground and hardened.
* Sealed and easy operating feed box has various feeds and thread cutting functions.
* ASA D1-4 camlock spindle nose.
* Machine is fitted with foot brake & work lamp for extra safety.
* Short bed length and space saving for training institutions.
* Fitted with safety chuck guard.
* Emergency stop buttons both ends of chip tray
LATHE: GOSAN TURNPOWER 1430 1PHASE
SKU:
L--109141
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
LATHE: GOSAN 2060 10HP
SKU:
L--109232
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: JESSEY STUDTURN 1430 (TAIWAN)
SKU:
L--110140
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Optional two-speed motor with 16 speeds, 35 - 2000rpm.
* Optional variable speed motor, 35 - 2500rpm.
* Smooth, easy speed change selection.
* Feed rod fitted with an overload clutch for safety.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
LATHE: WM-250G 250 X 500 X 26MM BORE 1 PHASE
SKU:
L--165260
* Most economical, widely useful hobby lathe
* Induction hardened & precision ground V-way beds.
* Tailstocks can be offset for turning tapers.
* Large MT4 spindle bore
* New enclosed quick-change gear box
* Precise cuts with cross & longitudinal powerfeed
* Includes change gears for metric & imperial threading.
* Righthand & lefthand thread cutting is available.
* Spindle supported by high precision bearings.
* Adjustable gibs for slideways
* Tailstock can be offset for turning taper.Tolerance test certificate, test flow chart included
* Stand sold seperately
functions. .
LATHE: GLH-330 330 X 1000 X 38MM 1 PHASE (NEW)
SKU:
L--120470H
* New Model
* Precision ground and supersonic frequency hardened bedways.
* The spindle is supported with precision roller bearings.
* Head stock gears are made of high quality steel ground and hardened.
* Sealed and easy operating feed box has various feeds and thread cutting functions.
* ASA D1-4 camlock spindle nose.
* Machine is fitted with foot brake & work lamp for extra safety.
* Short bed length and space saving for training institutions.
* Fitted with safety chuck guard.
* Emergency stop buttons both ends of chip tray
LATHE: GOSAN TURNPOWER 1440 3PH
SKU:
L--109142
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
LATHE: GOSAN 2060AV VARIABLE SPEED
SKU:
L--109234
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: JESSEY STUDTURN 1440 (TAIWAN)
SKU:
L--110142
* Rigid construction beds are induction hardened and precision ground.
* Harden and ground spindle & gears in headstock for high speed running with low noise.
* Optional two-speed motor with 16 speeds, 35 - 2000rpm.
* Optional variable speed motor, 35 - 2500rpm.
* Smooth, easy speed change selection.
* Feed rod fitted with an overload clutch for safety.
* Comprehensive range of metric, imperial, diametral & modular threads.
* Fitted with 2 axis digital readout & quickchange toolpost.
* Made in Taiwan.
LATHE: BL-336D 300 X 900 X 38MM BORE DRO, 1 PHASE
SKU:
L--120513
* Induction hardened & precision ground V-way beds.
* D1-4 Spindle is supported by high quality taper rolling bearing
* Automatic feed and threading are fully interlocked.
* Coolant pump & tank system.
* Fitted with a work lamp & foot brake for added safety.
* Quickchange toolpost for speedy tool changing.
* Gap bed for larger diameter work pieces.
* Independent leadscrew & feed rod.
* Carriage mounted spindle control lever.
* Tailstock can be offset for turning tapers.
LATHE: GOSAN 1440 1PH VARIABLE SPEED
SKU:
L--109150
* Gosan has been building lathes for over 35 years.
* Heavy duty geared head lathe.
* Hardened and ground gears.
* Hardened and ground bed-way.
* Open type chip tray can be pulled out easily to remove chip.
* Foot brake giving rapid braking.
* Emergency stop button equipped on the front of headstock.
* Jog button for easy gear engagement and inching spindle.
* Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
LATHE: GOSAN 2080A 10HP
SKU:
L--109236
* Heavy duty geared head lathe, with hardened and ground gears.
* 3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
* Spray lubrication system used for headstock.
* One shot lubrication pump for cross slide and bed-ways.
* Quick-change universal gearbox for inch, metric, DP and MP threading.
* Adjustable overload clutch in apron ensures proper cutting load.
* Cross slide screw is permanently immersed in oil and supported by thrust bearing.
* One piece base casting for maximum rigidity.
LATHE: WM330 330 X 500 X 38MM BORE -L1320, 1 PHASE
SKU:
L--120466
* Precision ground and supersonic frequency hardened bedways.
* The spindle is supported with precision roller bearings.
* Head stock gears are made of high quality steel ground and hardened.
* Sealed and easy operating feed box has various feeds and thread cutting functions.
* ASA D1-4 camlock spindle nose.
* Machine is fitted with foot brake & work lamp for extra safety.
* Short bed length and space saving for training institutions.
* Fitted with safety chuck guard.
LATHE: BL-1440D 360 X 1000 X 38MM BORE 1 PHASE
SKU:
L--120518
* Induction hardened & precision ground V-way beds.
* Spindle supported by high quality taper roller bearings.
* Sino 2 axis digital readout.
* Coolant pump & tank system.
* Large range of speeds and thread cutting options.
* Fitted with a work lamp & foot brake for added safety.
* Quickchange toolpost for speedy tool changing.
* Gap bed for larger diameter work pieces.
* Carriage mounted spindle control lever.
* Auto feed & threading fully interlocked.
* Tailstock can be offset for turning tapers.
* This lathe is available with an imperial leadscrew, indent only.