CRC CPC 250 is a clear, dry film corrosion inhibitor that creeps quickly to cover exposed metal surfaces, drives out moisture and leaves an ultra-thin, non-staining film that protects metal against corrosion. CRC CPC 250 is an exceptional choice for damp, moist or dusty storage environments. The thin film repels dirt and dust to keep stored parts and equipment clean and will not run or puddle during storage. CRC CPC 250 is highly effective in humid conditions or after floods. The protective film resists oxidation and prevents flash rusting during storage. Suitable for components which have been machined with water miscible fluids and require long-term storage prior to further use. Long-term or ongoing protection is gained through reapplication. If necessary the protection film can be easily removed with CRC Precision CO Contact Cleaner or solvents. Features & Benefits Dry Film – Treated parts may be easily handled without removing the film Non-Emulsifying in water – Promotes water displacement from surfaces Conductivity – Will not restrict electrical current flow Non-Staining – Will not discolour paper packaging Ready to Use – No additional mixing or chemical additives required Fast Drying – Allows parts to be handled quickly. Drying time to touch is one hour. Easy re-application over existing film and/or clean surfaces – Provides ongoing protection Safe on paint and most plastics Uses Hand tools, cutting tools Guns Blister-packed or shrink-wrapped metal parts Dies, moulds and parts in storage Electrical contacts and wiring terminals Machined parts prior to assembly Aluminium extrusions Protection against finger print corrosion on soft metals

* Quality long life protectant manufactured from natualal lanolene *

* Inox is a

* This windscreen sealant is manufactured in Germany by Mannol * This is a single component, polyurethane adhesive suitable for bonding glass windows to vehicles * Mannol sealant has ecepttionally strong bonding properties thus eliminatting the need for auxillary fastening aids Application: * Heat the cartridge to50-80deg C for 15min * For large panels we recomend you pre-heat a second cartridge as well * Make sure the frame is clean and completly dry * Clean the glass and remove any old sealant * Apply the sealant to the frame - the sealant will stay manoverable for 15min * After two hours the sealant will be completly set and the windscreen secure